Pulsar Trail 3 comprehensive review

The Pulsar Trail 3 LRF is the newest compact thermal riflescope in the Pulsar line, built on a rigid magnesium alloy monoblock chassis. That single-block design keeps the scope stable under recoil and holds zero shot after shot. It is the return of the Trail name, now with a built-in laser rangefinder and ballistic calculator on both models.

Two versions cover different needs. The Trail 3 LRF XR50 has a new 640×480 12-micron XR sensor (the microbolometer, or heat-sensing chip), a fast F50/1.0 germanium lens, and 3-24x magnification. It detects heat out to 2,300 m and resolves fine detail at range, so it suits open fields, deer and foxes, and long-range identification. The XQ50 uses a 384×288 17-micron sensor with 3.5-14x magnification and detection to 1,800 m. Its higher sensitivity cuts through fog, rain, and humidity, which makes it the pick for woodland, boar, and low-contrast nights.

Both share the same core. A 1,200 m laser rangefinder feeds the ballistic calculator for corrected aim. A Full HD 1920×1080 AMOLED display gives a sharp image. The round picture-in-picture mode lets you zoom on target while keeping the wider field of view. The quick-change LPS7i battery runs up to around 10 hours, the housing works to -25 degrees Celsius, and the scope is recoil rated to 6,000 joules and .375 H&H. This is a professional tool aimed at gamekeepers, pest controllers, and serious hunters.

Key features and specifications

Real-world hunting scenarios and use cases

A gamekeeper working mixed ground picks the XQ50 for foggy woodland edges, where its sensitivity holds a clean image of a boar in cover. A hunter clearing foxes across open fields chooses the XR50 for its detail and reach, allowing them to identify and range a fox at a distance. The monoblock build and quick-detach mount mean either scope goes from backpack to rail fast when day turns to night. The round picture-in-picture is genuinely useful: you zoom on the animal without losing the field around it. (complete guide to thermal imaging for hunting)

Should I buy the Trail 3 LRF XR50 or XQ50?

Choose the XR50 for long-range clarity, open fields, and detailed identification, thanks to its 640 sensor and 3-24x zoom. Choose the XQ50 for fog, rain, and close-to-mid-range woodland work, where its higher sensitivity and wider close-range view win. Both include a 1,200 m rangefinder and ballistic calculator. (Compare 384 vs 640 thermal sensors.)